2014-2023 – JEEP/RAM 3.0L ECO DIESEL – (EZ LYNK) – COMPLETE CUSTOMIZABLE DELETE BUNDLE

/P1/FLOPRO/GDP/EZLYNK.

• CONTACT US WITH QUESTIONS AT SUPPORT@MINIMAXXTUNER.COM
• DO NOT UNINSTALL PARTS FROM TRUCK UNTIL YOU HAVE RECEIVED ALL EXHAUST PARTS AND TUNES.
• ALWAYS TUNE TRUCK BEFORE YOU INSTALL EXHAUST PARTS OR EGR DELETE KITS.
• *This is custom tuning and is not returnable and not refundable and also cannot be cancelled once order is placed.
• 2014-2022* | Jeep Cherokee/Ram 1500 3.0L Eco Diesel | Full Delete Kit with the Ez lynk tuner | FULL DEF, DPF & EGR Delete KIT
• LAPTOP NOT REQUIRED WITH THE EZLYNK DELETE TUNER.

1. GDP 3 Tune ECM Flash (0/30 or 60HP Tunes) ECM will be flashed with Ez lynk tuner that will be sent to you.
2. In House Ez lynk Tuner comes with lifetime support pack+30/40/50/60 and 70 HP tunes.
3. FloPro OR Mbrp/P1 Delete Pipe, Removes Everything except Tail Pipe. (Reuses stock muffler)

Our kit is the solution for problem DPF and EGR issues. It will electronically disable the EGR or works with full removal of the EGR if you have a leaking EGR Cooler. It also does NOT require DEF fluid, exhaust filters or sensors in the exhaust system. The tune achieves a broad gain over the torque curve, increased fuel mileage and most of all reliability and peace of mind driving your Eco Diesel Dodge Ram 1500/Jeep Cherokee.

What our Eco Diesel Delete kit offers

-2.9 to 5.5 MPG increases (depending on driving and road conditions)

-Gains of up to 70 HP and 175 ft-lbs of torque. (IF MAX HP OPTION IS REQUESTED)

-Full removal of DPF Unit, DEF fluid is no longer required, no trouble lights.

Custom tuning changes includes

1. Fuel mileage increase. Customers are seeing 2.9 MPG-5.5 MPG increase!
2. Increase torque/performance curve.
3. Better warm up performance.
4. Accelerator pedal effort corrections.
5. Uphill driving adjustments made to hold gear longer.
6. Eliminated high pressure pump noise for MY15 and newer vehicles
7. Glow plugs indicator will be displayed only when glow plugs are operating.
8. Improved range to fan control for better cooling and run after shutting off the truck to help proper cool down.
9. Earlier activation controls to coolant temp while driving to keep engine and oil cooler.

Installation Steps

Living up to the brand name, EZ LYNK has made the installation process simple. We’ve broken down each step and provided some valuable information that will help you understand how your AutoAgent works.

Step One: Download & Install the AutoAgent App

The AutoAgent app is available for most smart devices. It requires iOS 8+ or Android 5+ to operate. You can download the iOs app here and the Android app here.

Step Two: Create an Account

From the AutoAgent app, select ‘create an account’. You will need to verify that your email address is valid upon creation. Dealers should always create an account for the end-user or use the account that the end-user has already created.

Step Three: Place Your Key in the ‘Run’ Position

Turn your key all the way over without starting the vehicle. This will boot your vehicle’s engine computer allowing the AutoAgent to communicate with it. If you have a push-to-start vehicle, you should press the Start button twice.

Step Four: Plug the AutoAgent into your OBD-II Port

With the key in the ‘Run’ position, plug your AutoAgent into your vehicle’s On-Board Diagnostics port. You can verify that it has booted correctly when you see that a blue and green light are illuminating from the device.

Step Five: Connect to your AutoAgent from your Smart Device

Navigate to the WiFi settings of your smart device and select the ‘EZLYNK_####’ network. A check mark will appear next to the network name when you have successfully connected. The AutoAgent 2 also allows you to connect via Bluetooth.

Step Six: Open the AutoAgent App

After you’ve successfully connected, you can navigate back to the AutoAgent app. You should now be able to see your vehicle gauges.

Step Seven: Lynk your Vehicle

When you purchase from Explosive Diesels or an authorized dealer, your vehicle will be AutoLynked. If your smart device has cellular data, you will notice that a message has appeared asking you to lynk the vehicle. Follow these prompts to connect your vehicle with your mechanic/technician. If your smart device does not have cellular data, you will need to connect to an internet available network and re-open the app to complete the lynking process.

Step Eight: Program Your Vehicle

After completing the lynking steps you are ready to flash your vehicle.
Navigate to > Vehicle > ECU Profiles. Here you can view the list of tunes or ECU profiles that are available to you.
Tap the button to download your desired ECU profile, followed by the ‘Install’ button to flash your vehicle. The app will guide you through the flashing procedure.

(When using a smart devices without cellular data you will need to switch to an internet available network to download the ECU profile, then back to the EZ LYNK network to install the ECU profile.)